HyperX Fury Black 8GB 1600MHz DDR3 CL10 DIMM Memory Product Description

SPECIFICATIONS

CL(IDD) 10 cycles

Row Cycle Time (tRCmin) 48.125ns (min.)

Refresh to Active/Refresh 260ns (min.)

Command Time (tRFCmin)

Row Active Time (tRASmin) 37.5ns (min.)

Maximum Operating Power TBD W*

UL Rating 94 V - 0

Operating Temperature 0oC to 85o C

Storage Temperature -55oC to 100o C

*Power will vary depending on the SDRAM used.

FEATURES

• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply

• VDDQ = 1.5V (1.425V ~ 1.575V)

• 800MHz fCK for 1600Mb/sec/pin

• 8 independent internal bank

• Programmable CAS Latency: 11, 10, 9, 8, 7, 6

• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock

• 8-bit pre-fetch

• Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]

• Bi-directional Differential Data Strobe

• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm 1%)

• On Die Termination using ODT pin

• Average Refresh Period 7.8us at lower than TCASE 85C, 3.9us at 85C < TCASE < 95C

• Asynchronous Reset

• PCB : Height 1.180" (30.00mm), double sided component

<<< Read Less